FirePaint can now supply a Water Based Intumescent Paint that can provide 60 min fire protection in just one spray coat. (DFT dependant on HP/A)
Whether you're an Architect, Specifier, Engineer or Applicator, this new Intumescent Coating has something for everyone and it's hard to know where to start! The loadings are fantastic, it conforms to standards, is in line with recommendations and application is easy.
The low loadings combined with a high solids content means this intumescent coating gives 60 minutes fire protection in just one spray coat (DFT dependent on Hp/A), to all standard rolled 3 sided beams and most standard rolled columns when applied by airless spray (it can also be brush applied).In turn, these low film thicknesses speed up the drying process which is becoming more popular as construction time is of the essence!Developed as a water based intumescent, it is free from health and safety issues and is also environmentally friendly.
Formulated to be free from TCEP (a known carcinogen), contractors can use the material and feel at ease as it reduces the risk of applicators coming into contact with (potentially) harmful substances.
Whilst all the above is important, you may be wondering about the practical aspects.Designed to be sprayed through a petrol pump (don't forget it can also be brush applied!), FX5002 has excellent reviews from painting contractors:
great spray pattern
good sag tolerance
no runs and gives a smooth finish
doesn't finger
no cracking
it holds up in 1 coat for all thicknesses
These excellent spray characteristics allow applicators to achieve good aesthetic finishes, so there's no need for a topcoat when applied in a C1 environment; but we also observed the need for coloured finish coats. FX5002 was developed so that Leighs water based and solvent based topcoats are suitable, giving you a choice of BS and RAL shades for decorative purposes!
For more info call us on (08) 9314 1083 or Email us at firepaint@firepaint.com.au